Calculator LMR Cables
Product Finder

Our TRAD® and NuTrac® radiating cables provide RF coverage in difficult-to-cover structures. Examples include rail and transit tunnels, underground mines, subways, metal-hulled ships, offshore oil rigs, nuclear power plants and buildings with metal supporting structures. Radiating cables can carry multiple frequencies on a single cable, and function as a single broadband antenna. The radio frequency signals are fed between the transmitter and antenna while a controlled amount of energy is leaked into the surrounding environment providing the necessary RF coverage.

Select a Radiating Cables Category

  • T-RAD®

NU-TRAC®

The Nu-Trac® radiating cables address applications where longer cable runs are required. Typical applications are long road tunnels, metros, and subway systems. The Nu-Trac series of cables are larger cables that offer lower down-line signal attenuation while still providing adequate RF coverage within the surrounding environment. This delicate balance of attenuation and coupling loss is achieved by the isolated overlapping shields that are separated by a thin polyethylene interlayer. The coupling mechanism between the inner and outer shields provides a controlled RF coverage.

TRC-1250-PE

 NU-TRAC®-1250 Polyethylene jacketed version

TRC-1250-FR

 Standard cable, flame retardant jacket, Low-Smoke, Non-Halogen

The Nu-Trac® radiating cables address applications where longer cable runs are required. Typical applications are long road tunnels, metros, and subway systems. The Nu-Trac series of cables are larger cables that offer lower down-line signal attenuation while still providing adequate RF coverage within the surrounding environment. This delicate balance of attenuation and coupling loss is achieved by the isolated overlapping shields that are separated by a thin polyethylene interlayer. The coupling mechanism between the inner and outer shields provides a controlled RF coverage.

T-RAD®

The T-RAD® series of flexible, low-loss cables is a cost-effective solution where point source antennas are not practical. T-RAD cables utilize a continuous single slot design by bonding a metalized shield to the low-loss foamed polyethylene core. This foamed core/shield design yields a very flexible, lightweight cable perfect for easy installation. The slot opening provides a balance between downline signal attenuation and coupling loss. Its broadband-friendly design allows it to be used from lower frequency AM/FM radio rebroadcast through the higher frequency 802.11 WLAN applications.

T-RAD-400-FR

 T-RAD®-400 Standard cable, FRPE jacket

T-RAD-900-FR

 T-RAD®-900 Standard cable, FRPE jacket

T-RAD-900-PVC

 T-RAD®-900 Standard cable, PVC jacket

T-RAD-600-DB

 T-RAD®-600 Standard cable, PVC/PE jacket for direct burial

T-RAD-600-FR-MSHA

 T-RAD®-600 Standard cable, FRPE jacket; MSHA Approved

T-RAD-600-PVC

 T-RAD®-600 Standard cable, PVC jacket

The T-RAD® series of flexible, low-loss cables is a cost-effective solution where point source antennas are not practical. T-RAD cables utilize a continuous single slot design by bonding a metalized shield to the low-loss foamed polyethylene core. This foamed core/shield design yields a very flexible, lightweight cable perfect for easy installation. The slot opening provides a balance between downline signal attenuation and coupling loss. Its broadband-friendly design allows it to be used from lower frequency AM/FM radio rebroadcast through the higher frequency 802.11 WLAN applications.

Do You Have Questions?

Not sure what you're looking for? Unable to find what you need? Get in touch with our team of experts who can help guide you towards a solution.

Speak to an Expert Product Finder

Speak to an Expert